• Viet Nam
  • American
  • Loading...

    Tổng tiền:

    Loading...

    Danh mục sản phẩm

    Loading...

    Sản phẩm hot

    hoaphatiec.vn

    InteliVision 10Touch

    Liên hệ
    InteliVision 10Touch
    InteliVision 10Touch
    ComAp / Czech Republic
    Còn hàng

    InteliVision 10Touch

    Order code: RD1IV10TBPF

    Intuitive and easy to use, the InteliVision 10Touch is a high-quality PC panel designed for a broad range of ComAp’s paralleling and single gen-set controllers for various applications. This 10.1” multi-touch display comes with embedded InteliScada display, our signature PC monitoring tool, enabling easy monitoring and simple screen configuration to meet your needs. 

     

    • Embedded InteliScada Display
    • Simple installation & configuration
    • Remote connection
    • Comprehensive data overview
    • Long-term monitoring of measured values  
    • Chia sẻ qua viber bài: InteliVision 10Touch
    • Chia sẻ qua reddit bài:InteliVision 10Touch

    InteliVision 10Touch will help you easily monitor the work of the ComAp controllers and third-party devices via Modbus protocol (using InteliGateway). Designed with an embedded InteliScada Display, it is easy to configure, operate and provides comprehensive overview of all the values you require. The panel display comes with two Ethernet ports and two serial port RS-232/485.

    The InteliVision 10Touch offers: 

    • InteliSCADA Display Lite, ComAp's signature monitoring tool with special features, pre-installed for easy screen configuration
    • Direct monitoring and control of third-party devices via Modbus using InteliGateway *
    • Support for monitoring and controlling the operation of up to 4 controllers (with InteliSCADA ver. 2.3.0 and above) *
    • IP camera support
    • 10.1” fanless Panel PC with touch screen
    • Strong front panel protection compliant with IP66 ingress protection rating
    • Large image gallery to easily set-up your display
    • Pre-installed SCADA templates for our controllers InteliGen 1000 and InteliMains 1010
    • Two Ethernet ports
    • Remote connection to the display via various applications, such as Remote Desktop or TeamViewer
    • Long-term storing of up to 128 measured values (with InteliSCADA ver. 2.3.0 and above) *
    • Fast and intuitive navigation
    • Broad operating temperature ranging from -20°C to +60°C
    • Compatible with the majority of ComAp's controllers, including:
        • InteliGen 1000
        • InteliMains 1010
        • InteliGen 500
        • InteliGen 500 G2
        • InteliGen 200
        • InteliGen NT
        • InteliGen NTC
        • InteliSys NTC
        • InteliGen GSC
        • InteliGen GSC-C
        • InteliSys Gas
        • InteliMains NT
        • InteliFieldbus Gateway
        • InteliGateway   

    For a complete list of all compatible controllers, see the DataSheet/Global Guide.

    For the best functionality, we recommend that you install the latest version of the InteliSCADA monitoring tool.

    *Extended feature available InteliSCADA Display Pro/ InteliSCADA Display Pro+ with a software key

    There are three types of licenses for InteliSCADA Display: Lite, Pro and Pro+. Below is an overview of the features and capabilities of each license type.

    Tags

     

    Sản phẩm liên quan

    InteliMains 210 G2
    Liên hệ

    InteliMains 210 G2

    InteliMains 210 G2  FOLLOW Order code: IM4210XXBAA InteliMains 210 G2 is the mains supervision controller used for synchronising a set of gen-sets to the Mains/Utility or bus-tie-breaker operations, primarily intended for standard switchgear applications.   This product is a new generation of our InteliMains 210 controller.  Cybersecurity by design Built-in PLC interpreter Compatibility across the portfolio Plug-in modules
    InteliGen4 200
    Liên hệ

    InteliGen4 200

    InteliGen4 200 Order code: IG4200XXBAA, IG4200XXBLA InteliGen4 200 is a diesel gen-set control unit for common paralleling applications supporting both single and multiple gen-sets running in grid-tied or island operations.    This product is the new generation of our InteliGen 200 controller.  Cybersecurity by design     Plug-in modules Stage V & Tier 4 Final     Dynamic spinning reserve User defined protections and setpoints  
    InteliGen 1000
    Liên hệ

    InteliGen 1000

    InteliGen 1000 Order code: IG31000XBBB, IG31000YBBB InteliGen 1000 is the most advanced ComAp gen-set controller for multiple gen-sets with paralleling operations, with or without connection to the mains or other source. Intended primarily for switchgear applications, this high-end controller will help you control and monitor demanding projects with critical infrastructures such as datacentres, hospitals and banks.    Grid codes ready Cooperation with up to 64 additional gen-sets/mains/tie controllers Cybersecurity by design Hot swap redundancy* CAN bus redundancy* Modbus Client controlling 3rd party devices* Large built-in PLC interpreter Built-in CAN-bus logger   Compliant with international grid codes: European EN 50549, including national implementations as VDE-AR-N 4110:2018, VDE-AR-N 4105:2019, G99, TOR, American IEEE 1547 and others.   
    InteliMains 1010
    Liên hệ

    InteliMains 1010

    InteliMains 1010 Order code: IM31010XBBB InteliMains 1010 is the most advanced ComAp mains/utility/tie-breaker supervision controller for complex applications. Designed following top IT security standards to protect your operations, the InteliMains 1010 acts as a relay for mains protection and helps synchronise your gen-sets to the mains/utility for switchgear applications and critical infrastructure installations, such as datacentres, hospitals or banks.    Grid codes ready Hot Swap Redundancy* Cooperation with up to 64 additional gen-sets/mains/tie controllers CAN bus redundancy* Cyber security by design Modbus Client controlling third party devices* Large built-in PLC interpreter Built-in CAN-bus logger 
    InteliVision 18Touch G2
    Liên hệ

    InteliVision 18Touch G2

    InteliVision 18Touch G2 Order code: RD2IV18TBPE Easy to install, configure and use, the InteliVision 18Touch G2 provides comprehensive overview and monitoring of your complex installations. A new generation of our InteliVision 18Touch, this display will support your control and monitoring needs for sites with multiple controllers and complex installations, such as CHP or Hybrid that need to monitor a large number of values.  The product comes with embedded InteliSCADA software, ComAp's PC monitoring and management tool, enabling easy screen configuration, history check and change of setpoints from a single location.   Embedded InteliScada Lite Preinstalled IGS-LOG Broad communication capabilities Event-based history Simple installation & configuration Integrated mounting kit
    InteliGen 500 G2
    Liên hệ

    InteliGen 500 G2

    InteliGen 500 G2 Order code: IG4500XXBAA InteliGen 500 G2 is a paralleling controller with 5" colour display for advanced and more complex diesel gen-set applications, supporting both single and multiple gen-sets running in grid-tied or island operations.    This product is a direct successor of our InteliGen 500, InteliGen NT GC and InteliGen NTC GC controllers. Stage V & Tier4Final Cybersecurity by design Multi ECU support Start-up synchronisation  Forced values Signal sharing across units* Dynamic spinning reserve Controller redundancy*